Wednesday, October 29, 2014

What You Have To Put Into Consideration When Choosing UPS

By Armando Rodriguez


Uninterruptible Power Supply (UPS) is an electronic device that offers battery backup service to computers or other devices during power interruptions. They therefore allow your devices to shut down safely in case of power outages. Another function of UPS is to protect your device from over-voltages and brow-outs. Choosing UPS system that suits your need can improve performance of your devices.

Ensure that you choose a UPS that has enough power supply. Peripherals attached to your computer should not demand more power than your UPS battery capacity. A good battery backup system should detect the power output and make an alert if over-voltages or power insufficiency is noted. Some devices may also require more power on start up or during heavy usage; and furthermore, you might need to invest more to get better UPS system.

You would also have to consider the run time of the UPS. This will determine for how long the backup system will give you power. When using devices that consume power faster, you might experience less run time. To understand the UPS run time, consider the power requirements off each device, bearing in mind that devices use more power during booting or overworking.

It is also critical to consider how the UPS system decides when to switch to devices battery power. The backup systems are categorized into three based on this factor. There is the standby mode UPS system which detect when power supply is below a certain level. It is the cheapest and most available type of power backup.

Another type of UPS is the online interactive model whose inbuilt transformer controls and detects changes in power supply. Only when the power is interrupted or too low that the backup system can go to battery. This model can however be disastrous especially during continuous power interruptions and may damage your computer.

There is also a dual conversion type UPS system that is the most advanced battery protection and backup mode. Power is broken down to DC and perfectly reconstructed to AC by the inverter with no transfer switching time. The process will eliminate any incoming line noise or surge, as it adjusts to high or low voltages and produces perfect AC power. This will ensure that your battery power remains intact unless when there are power outages.

It is also necessary to consider the power output quality. Some UPS system cannot output the actual electric sine wave power. A standby mode backup system will only convert power to square wave which is of poor quality. Some devices can only work with the sine wave AC power such as wireless routers. This might damage the devices when run time decreases and device shuts down. To cater for such possible risks, you can consider buying a dual compression UPS system. Such systems are however costly but are worth trying.

Lastly, find out the specifications of the power backup system in terms of number and nature of power outlet ports. You will need a backup system that can protect your battery and computer from power outages and blowouts results. Some cheaper systems have outlets that offer protection for only electrical noise and surges. Also consider whether the system has other ports that are fully protected from electrical risks. Such ports may include the Ethernet, phone jack and other cable outlets.




About the Author:



No comments:

Post a Comment