There are many activities usually carried out either for recreation, fun as well as exercise. Others are done as a recommendation by medics to lose weight and maintain their body in good shape. One of these activities includes the swimming. It is an exercise loved by many as it helps exercise the entire body at a go. Therefore, if you own a swimming pool, you need to maintain it well for the service it offers. To ensure it is in the best condition then you need to know some of these basics on pool maintenance.
There some people who depend on their service providers in the provision of maintenance facilities. This is not wrong. However, there are things that you have to keep frequently checking by yourself. Check on the condition of the water to avoid accumulation of murky water. Remember that this can pose a great danger.
These facilities are susceptible to pipe breakages and if not checked regularly can cause leakages. In some cases, the breakage can occur even without your notice and make the whole place look messy especially when the facility is indoor. Therefore, you need to conduct close monitoring now and then regardless whether you have the service providers.
A key thing that you should always check on is the water levels of your pool. This should always be done possibly twice a month. There are people who have no idea of how this should be but here are the tips. It should not be very high neither too low. It should be in the middle and if not, it should be adjusted if it goes below or higher.
Also, you are responsible for the cleaning of your system. If this is not done in a thorough way, then you will start experiencing the algae issues. It is mostly found on the stairs or tiles. If you experience such, then you need to scrub the affected areas thoroughly.
The facility should be well aerated, but again it should be free from excess air. Excess air may make the pumps dry and end up freezing. The damage caused can be very expensive and therefore you need to be cautious. The probable cause for excess air is the leaking pipes. It can be easily detected in a case where you see bubbles.
The water should be treated to avoid any contamination. The chlorine used should be the right amount to avoid raising the water PH which can be hazardous. Ensure the PH level is above 7.2 and not exceed 8.0. That is the ideal level to kill any germs, and it is not harmful to human body.
Keeping your system clean and in good condition is for the benefit of you, your family members and your customers. It also saves you a lot from repairing expenses. Remember also to keep it free from accumulation of debris at the bottom. You can do this by regularly vacuuming it or installing an automatic vacuum system.
There some people who depend on their service providers in the provision of maintenance facilities. This is not wrong. However, there are things that you have to keep frequently checking by yourself. Check on the condition of the water to avoid accumulation of murky water. Remember that this can pose a great danger.
These facilities are susceptible to pipe breakages and if not checked regularly can cause leakages. In some cases, the breakage can occur even without your notice and make the whole place look messy especially when the facility is indoor. Therefore, you need to conduct close monitoring now and then regardless whether you have the service providers.
A key thing that you should always check on is the water levels of your pool. This should always be done possibly twice a month. There are people who have no idea of how this should be but here are the tips. It should not be very high neither too low. It should be in the middle and if not, it should be adjusted if it goes below or higher.
Also, you are responsible for the cleaning of your system. If this is not done in a thorough way, then you will start experiencing the algae issues. It is mostly found on the stairs or tiles. If you experience such, then you need to scrub the affected areas thoroughly.
The facility should be well aerated, but again it should be free from excess air. Excess air may make the pumps dry and end up freezing. The damage caused can be very expensive and therefore you need to be cautious. The probable cause for excess air is the leaking pipes. It can be easily detected in a case where you see bubbles.
The water should be treated to avoid any contamination. The chlorine used should be the right amount to avoid raising the water PH which can be hazardous. Ensure the PH level is above 7.2 and not exceed 8.0. That is the ideal level to kill any germs, and it is not harmful to human body.
Keeping your system clean and in good condition is for the benefit of you, your family members and your customers. It also saves you a lot from repairing expenses. Remember also to keep it free from accumulation of debris at the bottom. You can do this by regularly vacuuming it or installing an automatic vacuum system.
About the Author:
Find a review of the benefits of using pool maintenance services ON area and more info about a reliable swimming pool contractor at http://www.clearchoicepools.ca today.
No comments:
Post a Comment